MATERIAL SAFETY                                                                 TEC-N-TEC INC.

DATA SHEET                                                                                                           8244 PASCAL-GAGNON

                                                                                                                                 ST-LEONARD, QC , H1P 1Y4

                                                                                                                                 TEL.: (888) 832-7777

                                                                                                                                 EMERGENCY TEL: CANUTEC (613) 996-6666

Adhertec:                 N̊ BA3025

Issued date: April 18, 2002                    Revised: August 4^th, 2005 

By: C. Tremblay                                                                                                       By: D. Laplante

                1. PRODUCT IDENTIFICATION

Hot melt based on EVA-copolymer

                2. HAZARDOUS INGREDIENTS            Case n̊                   %             OSHA PEL              ACGIH TLV             OTHERS

No hazardous ingredient

                3.PHYSICAL AND CHEMICAL DATA

                                Softening Point............................             85̊

                                Boiling Point:................................           N/A

                                Vapour Pressure (mmhg):............           N/A

                                Evaporation rate:..........................           N/A

                                Water solubility:...........................           Insoluble

                                Specific gravity:............................        0.98 (water=1)

                                Volatility (%):................................        0%

                                Organic volatile compounds:........           UN

                                PH:...............................................           Unknown

                                Viscosity:.....................................            10,000 cps/170

                                Appearance/odour:.......................          Solid (sticks)/ Amber with light resin smell

                4.FIREFIGHTING MEASURES AND EXPLOSION DATA

                                Flash Point:..................................           200̊ C

                                Auto-ignition:................................           UN

                                 Fire extinguishing media:.............  Foam, CO2, dry chemical, water spray

                                Special firefighting procedures:....      Fire will produce dense black smoke containing products of combustion. Decomposition products may be a hazard to health. Appropriate self-containing breathing apparatus may be required.

                                Fire and explosion hazards:.........           No unusual hazards are expected.

                                NFPA for hazardous compounds:     N/A

                                Unusual reaction risks:.................           None

                5. STABILITY AND REACTIVITY DATA

                                Stability:.......................................            Stable >200̊C

                                Material to avoid:..........................           None known

                                Dangerous polymerization: ..........           Stable at normal temperature and pressure                            Reactivity:.................................... None

                                Hazardous decomposition

                                products:......................................            Carbon dioxide, carbon monoxide

                Abbreviations: N/A - Not available N/Ap - Not applicable                             UN - Unknown

.../2

                                                                                                                                                                                                         page 2

Identification N̊: BA3025

                6. SPILL OR LEAK PROCEDURES

In case of spills, allow to cool and sweep up. Hold waste for dispose according to local regulations.

                7. FIRST-AID MEASURES

Eye contact:.................................... Remove contact lenses. After separating the eyelids flush with copious amount

                                                                                                 of water, at least 10 min. Seek medical advice.       

                                Skin contact:...................................         Rinse with cold water until the pain stops. If medical advice is necessary, rinse

                                                                                                 until doctor takes over treatment.

                                Inhalation:.......................................         In case of exposure to gases formed at high temperature remove affected

                                                                                                 person from area. Fresh air and rest. Seek medical advice if inconvenience

                                                                                                 persists.

                                 Ingestion:........................................         DO NOT INDUCE VOMITING. If vomiting occurs, hold head low so stomach content does not enter the lungs. Seek immediate medical advice.

                                Other first-aid measures:................         In all cases of doubt, seek medical attention.

                8. TOXICOLOGICAL PROPERTIES

                                Properties injurious to health:..........   Gases formed at high temperature may irritate the eyes and the respiratory

                                                                                                 tract.

                9. SPECIAL PROTECTION MEASURES FOR HANDLING AND STORAGE

                                Required conditions for EPP...........        Provide adequate ventilation.

                                Eye protection.................................        Use if necessary suitable eye protection when near the melted product.

                                Glove requirements.........................        Use protective gloves when handling the melted product.

                               Clothing requirement....................... Use suitable work clothes when near the melted product. Respirator requirements..................Avoid breathing warm gases

                                Technical control:............................        Preferably use an extractor hood over the melted used for the product.

                                Storage...........................................         Store product in tightly closed container in a dry place. Keep out of the reach of children.

                                Waste Management:....................... In conformity with local municipal by-laws and or Environment Ministry.

                10. NOTICE

All statements, recommendations and technical information contained in this document are based on data supplied by the manufacturer which Tec-N-Tec believes to be accurate as of this date. The buyers however should test this product before use. Tec-N-Tec will assume no obligation or liability for results obtained from the use of this product. The product and information herein are believed to be accurate. Tec-N-Tec Inc. will not be liable for any direct or indirect use and or any other damage whatsoever, except to replace the product and or refund the purchase price to the purchaser.