Industrial Liquid Glue

Liquid Adhesive

Liquid Adhesive
CODE	TECHNICAL DATA SHEET (HTML or PDF)	MATERIAL SAFETY DATA SHEET (HTML or PDF)	CHARACTERISTICS	APPLICATIONS
112201	HTML	HTML	Synthetic pressure sensitive water base adhesive.	Polyethylene foam to itself or for other difficult to bond substrates.
RIV314	HTML	HTML	Vegetable base adhesive which gives an aggressive initial bond. Also known as Dextrin.	Used for joining cardboards to itself. Also used for industrials applications.
RIV321	HTML	HTML	Aliphatic solvent base adhesive which can be reactivated by heat.	Used in the binding field. Can also be used as gluing in the pastes and papers industrie.
RIV329	HTML	HTML	Polymer base adhesive which gives a permanent bond.	Used for joining cardboards to itself.
RIV351	HTML	HTML	Polymer base adhesive which gives a permanent bond.	Used for gluing difficult surfaces like waterproof or greases resistant coatings, on non porous surfaces and certain plastics.
RIV371	HTML	HTML	Elastomer based adhesive which gives a very strong and permanent initial adhesion.	Polystyrene foam to a variety of surfaces.
RIV500	HTML	HTML	Water based polymer adhesive which can be reactivated by heat.	Fiberglass insulation to galvanized steel in the manufacturing of air conditioning ducts. Useful for hard to bond materials such as waterproof coatings or grease resistant, on non-porous surfaces or some plastics.
Solvent, Cleaner, Grease Remover
CODE	TECHNICAL DATA SHEET (HTML or PDF)	MATERIAL SAFETY DATA SHEET (HTML or PDF)	CHARACTERISTICS	APPLICATIONS
RIV338	HTML	HTML	Diluting solvent and industrial cleaner containing chlorinated aliphatic solvent.	Used especially for industrial applications as a grease remover. Can be used for multiple purpose.
RIV347	HTML	HTML	Cleaner / Grease remover with a fresh lemon smell.	Used especially in the metal industry as a metal cleaner. Can be used for multiple purpose.
RIV352	HTML	HTML	Cleaner / grease remover with solvent.	Used especially for industrial applications such as a thinner in the paint manufacture and a solvent in the fusion of certain plastics. Can be used for multiple purpose.

Tips to obtain a strong bond

- Press uniformly all substrates.

- Make sure surfaces are clean, without contaminants, dust or releasing agents.

- Line-up substrates before assembling.

IMPORTANT NOTICE

All statements, recommendations and technical information contained in this document are based on tests and information which Tec-N-Tec believes to be accurate at publication. As Tec-N-Tec cannot control application environment, we recommend that buyers conduct their own test. Tec-N-Tec will assume no obligation or liability for results obtained from the use of this product and will not be liable for any direct, indirect consequences or any other damage, except to replace the product and or refund the purchased price to the buyer.