Nouveau: Teccro, équivalent au Velcro \ New: Teccro, Velcro equivalent

Tec-N-Tec Inc. Teccro equivalent VELCRO, rivets, insert,adhesif Tec-N-Tec Inc. rivet, adhesive, insert,velcro equivalent, rivets, ontario,quebec,canada Conforme RoHS Compliant, rivet, insert, Teccro = VELCRO equivalent, quebec, usa, canada, ontario

Tec-N-Tec inc. News \ Velcro equivalent, adhesive, tapeTec-N-Tec inc. Nouvelles / Equivalent Velcro, rivets, ecrou insere
Tec-N-Tec inc. Sales conditions / rivets, insert, vlecro equivalent, hook and loopTec-N-Tec inc. Conditions de vente/ Equivalent Velcro, rivet, canada, ontario, quebec, montreal, usa

Tec-N-Tec HomeAdhertec HomeDuotec HomeRivetec Home
Company ProfileTo Reach Us / Business Hours
 

"DRILL-N-TEC"
High speed steel (HSS) M35 drill bits

High Speed Steel (HSS) M35 Jobber Drill Bits
 
CODE DRILL SIZE DECIMAL EQUIVALENT OVERALL LENGTH FLUTE LENGTH BAG
  (D) INCHES  (D) (L) (F) QUANTITY
F3541J #41 .0960 2" 3/8 1" 3/8 10
F3530J #30 .1285 2" 3/4 1" 5/8 10
F3529J #29 .1360 2" 7/8 1" 3/4 10
F3520J #20 .1610 3" 1/4 2" 1/8 10
F3519J #19 .1660 3" 1/4 2" 1/8 10
F3511J #11 .1910 3" 1/2 2" 5/16 10
F358J #8 .1990 3" 19/32 2" 1/2 10
F35FJ #F .2570 4" 1/8 2" 7/8 10
F351764J #17/64 .2656 4" 1/8 2" 7/8 10


High Speed Steel (HSS) M35 Stub Drill Bits
 
F3511S #11 .1910 2" 19/64 1" 5/32 10
F3530S #30 .1285 1" 29/32 1" 10
F351364S #13/64 .2031 2" 3/16 1" 3/16 10
F352564S #25/64 .3906 3" 13/64 1" 7/8 5
F351732S #17/32 .5312 6" 2" 23/32 5


 

"HIGH SPEED STEEL (HSS) M35"

Our High Speed Steel (HSS) M35 Drill Bits are alloyed with 5% Cobalt which gives them the ability to retain a high degree of hardness when drilling at elevated temperature in hard metal like stainless steel. The HSS also helps to keep the sharpness longer, thus increasing the lifespan. The 135º split point enables accurate positioning and less thrust when drilling. A thicker web provides extra strength and rigidity which reduce the risk of breakage.
Different High Speed Steel (HSS) Comparison
DIN - ANSI W Mo V Co Cr C
DESIGNATION TUNGSTEN MOLYBDENUM VANADIUM COBALT CHROMIUM CARBON
HS 6-5-2 • M2 6.00 - 6.75 4.75 - 5.50 1.75 - 2.30 0.60 MAX 3.80 - 4.50 0.80 - 0.90
HS 6-5-2-5 • M35 6.00 - 6.75 4.75 - 5.70 1.75 - 2.30 4.50 - 5.50 3.80 - 4.50 0.85 - 0.95
HS 2-10-1-8 • M42 1.00 - 2.00 9.00 - 10.00 1.00 - 1.50 7.50 - 8.50 3.80 - 4.50 1.00 - 1.25
*ALL NUMBERS ARE EXPRESS AS PERCENT (%)
**ALL DRILL BITS ALSO CONTAIN THE FOLLOWING ELEMENTS IN VERY SMALL QUANTITY: MANGANESE, PHOSPHORUS, SULPHUR AND SILICON.

As we can see in the table above, the M35 has a lower cobalt content than its U.S counterpart, the M42. The M35 is thus lower in hardness than the M42, but higher in toughness. This has for effect to increase its lifespan since the higher the tool hardness, the more brittle the tool is to chipping and breakage.

 

8244 Pascal-Gagnon,
Montreal, QC, Canada
H1P 1Y4		 Tel: (514)325-7777  US/Canada 1-888-TEC-7777
Fax: (514)325-0282  US/Canada 1-888-TEC-0282
Courriel / E-Mail: pro@tec-n-tec.com
FRANCAIS ENGLISH
Accueil | Adhertec | Duotec | Rivetec | Profil
 Conditions de vente | Contact / Heures d'ouverture		 Home | Adhertec | Duotec | Rivetec | Profile
 Sales conditions | To reach us / Business hour
Webmestre de Tec-N-Tec Tec-N-Tec Webmaster

 

© Copyright Tec-N-Tec Inc.