"RIVETEC" TEC1A CORNER HEAD

- To set blind rivets of 1/8, 5/32, 3/16 diameter (all materials)

- Fits on riveting tool
  PH1  PH2  PH2KA  PH2000

Specifications
Parts list and diagram
 

"GESIPA OFFSET HEAD

Fits on  riveting tools
PH1   PH2   PH2KA

Code de Produit:

- #7040016 2 jaws system for rivet 3/32 and 1/8 all materials
- #7040024 3 jaws system for rivet 3/32, 1/8, 5/32 and 3/16 all materials

Product code:

- #7171986 to set blind rivets of 3/32, 1/8 all materials and 5/32, 3/16 aluminium

Product code:

- #7158971 to set blind rivets of 3/32, 1/8 all materials and 5/32, 3/16 aluminium

EXTENSION UNIT

Product code:

- #7171641 fits on riveting tools   PH1   PH2   PH2KA
- #7159994 fits on riveting tool    PH2000
- #7120419 fits on riveting tool    SN2

For the production of pivot-type fastening. By supporting the nosepiece directly on the material (in lieu of the rivet head) the clamping effect of the blind rivet will be reduced.

Product code:

- #7101325 adaptor for 3/16 diameter rivets
- #7101570 adaptor for 1/8 diameter rivets

Nose extension units
50mm or 100mm

• The nose extension units are useful to reach the recessed riveting location  (for example, deep parts).

• Available in two lengths, 50mm and 100mm.

• Includes an extended head, an extended jaw pusher and a complete transition piece.

• NB: The extended heads have the same diameter as the original.

Nose extension unit 50mm
Taurus1 - 7562031
Taurus2 - 7571016
Taurus3 - 7581021
Taurus4 - 7581021

Nose extension unit 100mm
Taurus1 - 7562015
Taurus2 - 7571019
Taurus3 - 7581023
Taurus4 - 7581023

  Specifications