Accessories for Gesipa Taurus series

Swivel connector for air supply line 7561023

Used to increase the freedom of movement of the tool around its air supply line connection. Two different installations are possible (see pictures above). The kit includes the swivel connector itself as well as a sealing ring.
Specifications

Nose extension units 50mm or 100mm
	The nose extension units are useful to reach the recessed riveting location (for example, deep parts). Available in two lengths, 50mm and 100mm. Includes an extended head, an extended jaw pusher and a complete transition piece.
Nose extension unit 50mm Taurus1 - 7562031 Taurus2 - 7571016 Taurus3 - 7581021 Taurus4 - 7581021	Nose extension unit 100mm Taurus1 - 7562015 Taurus2 - 7571019 Taurus3 - 7581023 Taurus4 - 7581023
Specifications

Evacuation tube 7571356
	The mandrel can be collected in an adequate container, so that the workstation remains clean and the riveting task can be performed without interruption. The tool suction system must be on to use the evacuation tube.
Works with Taurus 1, 2, 3 and 4 Tube length: 1.5 meters (5 feets)

Other accessories for Taurus series
	RIVETEC	GESIPA	DESCRIPTION	ENGLISH
	CODE	CODE	FRANCAISE	DESCRIPTION
T2, T3	7571353	7571353	TUBE REDUCTEUR DES TIGES POUR PETIT RIVETS - JUSQU'A 5/32 (4 mm)	MANDREL REDUCED TUBE FOR SMALL RIVETS - UP TO 5/32 (4mm)
T1, T2, T3, T4	7562005	7562005	CLE A ERGOT	PIN WRENCH
T1, T2, T3, T4	7562006	7562006	CLE A ENCOCHE	GROOVE WRENCH
T1, T2, T3, T4	7562007	7562007	DISPOSITIF DE SERRAGE DANS L'ETAU	CLAMPING DEVICE
T1, T2, T3, T4	7562008	7562008	DISPOSITIF D'ASSEMBLAGE DE LA VALVE	VALVE ASSEMBLY DEVICE
T1, T2, T3, T4	7562195	7562195	CLE D'ENTRETIEN SW 12/14	MAINTENANCE WRENCH SW 12/14
T1, T2, T3, T4	7562187	7562187	CLE D'ENTRETIEN SW 14/17	MAINTENANCE WRENCH SW 14/17
T1, T2, T3, T4	7158955	7158955	100ml HUILE HYDRAULIQUE	HYDRAULIQUE OIL 100ml
T1, T2, T3, T4	7562179	7562179	ENTONNOIR DE PLEIN D'HUILE	OIL REFILL CAN