Gesipa TAURUS,Jaw system and double use of compressed air system details

Nouveau: Frein Filet TecBlok \ New: Threadlocker TecBlok

Tec-N-Tec Inc. Teccro equivalent VELCRO, rivets, insert,adhesif Tec-N-Tec Inc. rivet, adhesive, insert,velcro equivalent, rivets, ontario,quebec,canada Conforme RoHS Compliant, rivet, insert, Teccro = VELCRO equivalent, quebec, usa, canada, ontario

Tec-N-Tec inc. News \ Velcro equivalent, adhesive, tapeTec-N-Tec inc. Nouvelles / Equivalent Velcro, rivets, ecrou insere
Tec-N-Tec inc. Sales conditions / rivets, insert, vlecro equivalent, hook and loopTec-N-Tec inc. Conditions de vente/ Equivalent Velcro, rivet, canada, ontario, quebec, montreal, usa
Tec-N-Tec HomeAdhertec HomeDuotec HomeRivetec Home
Company ProfileTo reach us / Business hours
 


JAWS WHICH WILL NEVER BITE THE DUST...
 
A worldwide unique jaw mechanism (Patent pending):





Not just jaws, but a lot more

All tools of the TAURUS are equipped with a unique and completely new jaw mechanism. Compared with conventional systems, following features are decisive:

  • The three jaws are not anymore finding their place freely in the jaw housing. Each jaw slides back and forth in an individual channel, under perfect control.
     
  • The jaws are not anymore applied on the mandrel surface by just the pressure of a spring, but propelled by the full energy of the compressed air, they firmly clutch themselves into it. The pressure applied on the mandrel is 10 times higher.
     
  • The setting operation includes two distinct steps, even if they are not perceived as such by the operator: When triggered, the tool first pushes the jaws with all its energy onto the mandrel. Once this is completed the pulling movement then starts to set the rivet.

These features generate following advantages for the tool user:

  • Since the jaws are not sliding anymore on the mandrel, the full nominal tool course can be used to set the rivet.
     
  • No material is shaved off the mandrel surface, thus eliminating jaw and jaw housing jamming with dirt.
     
  • Wear of the jaws is greatly reduced.

All this means a much higher tool's readiness, greatly reduced maintenance and spare parts consumption.

All in all: Less costs!

 


... AND A SMART POWER MANAGEMENT NOT JUST
GENERATING AIR FLOW, BUT CASH FLOW!
 
Cumulated cost savings through double use of compressed air:

Compressed air with double action

Compressed air is an expensive source of energy, even if widely used in industry because of its versatility.

A very good reason to use is as parsimoniously as possible. The TAURUS range of tools is of great help in this purpose thanks to a unique technical peculiarity.

The air consumed for setting the rivet is re-used a second time to eject the broken mandrel: First cost saving! This double use allows to switch-off the air suction which, on competition tools, is necessary for the mandrel ejection: Second, even more substantial cost saving, since the air suction otherwise needs approx.100 litres of compressed air per minute.

Being in a position to switch off the air suction on a Taurus 2 at 20 riveting operations per minute means a 68% saving of compressed air!

By the way, this system is unique, worldwide!



 


8244 Pascal-Gagnon,
Montreal, QC, Canada
H1P 1Y4
Tel: (514)325-7777  US/Canada 1-888-TEC-7777
Fax: (514)325-0282  US/Canada 1-888-TEC-0282
Courriel / E-Mail: pro@tec-n-tec.com
FRANCAIS ENGLISH
Accueil | Adhertec | Duotec | Rivetec | Profil
Conditions de vente | Contact / Heures d'ouverture
Home | Adhertec | Duotec | Rivetec | Profile
Sales conditions
| To reach us / Business hour
Webmestre de Tec-N-Tec Tec-N-Tec Webmaster

 

© Copyright Tec-N-Tec Inc.